Using VVDI2 or CGDI Prog Read BMW ISN from MSV80?
Confirmed! Both Xhorse VVDI2 and CGDI Prog are able to read BMW ISN codes from the MSV80.
In details…
Option 1: Xhorse VVDI2 BMW read MSV80 ISN codes
VVDI2 Commander full version description:
VVDI2 is a multifunctional automotive diagnostic platform, mainly for automotive maintenance(replace 2nd parts, diagnostics, keys, mileage etc)
Support many transponders: Read/Write/Copy/Verify etc
Support Immobilizer Data Tool and make remote
Option 2: CGDI Prog BMW read ISN from MSV80
CGDI MSV80 BMW Car Key Programmer CGDI Functions:
1.Update in real time,products updated in zero cycle time,support model added in real time.
2.BMW CAS3/CAS3+Data repair--support change replace and split CAS computer,BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine
change computer,ISN code reading and writing.
3.Equipment security greatly enhanced, the hardware anti-crack,anti-software copy.
Option 1: VVDI2 4.9.0 read MSV80 ISN no issues
Go to Key Learn, then select ECU ISN
Select Type: MSV80, then Read ECU information
This is ECU info
Recommend: Connect extra power to the car
Need 8 minutes
Reading ISN…
Read ISN from ECU successfully
Job’s done.
Option 2: CGDI Prog Auto Key Programmer read BMW ISN from MSV80 successfully
Method 1: can read directly ISN code in the car,please make sure car voltage is 12V above,directly connect OBD to operate–time about 5 minutes.
Methods 2: can directly split engine computer (DME) to operate–connect diagram as follows:
